- 1 How do you restore an antique finish?
- 2 What is the best finish for antique furniture?
- 3 How do you condition antique wood?
- 4 Does refinishing antique reduce value?
- 5 Is antique restoration profitable?
- 6 Should you oil antique furniture?
- 7 Is it better to sand or strip furniture?
- 8 How do you clean old wood without removing finish?
- 9 What is the best way to clean old wood furniture?
- 10 How do you restore faded wood?
- 11 Does painting an antique devalue it?
- 12 Does refinishing reduce value?
- 13 What’s the difference between antique and vintage?
How do you restore an antique finish?
Use denatured alcohol on shellac, lacquer thinner on lacquer, a three-to-one mixture of alcohol and lacquer thinner on a lacquer/shellac mixture. To reamalgamate the finished surface, apply solvent along the grain of the wood in quick, long strokes; work quickly, and don’t let the brush get dry.
What is the best finish for antique furniture?
Film finishes offer better protection because they leave a thicker film on the surface of the wood, which protects against water and scratches. Varnish and water base are common film finishes. Most of the better 18th century furniture and almost all of the 19th century furniture is finished with shellac or varnish.
How do you condition antique wood?
Basic maintenance of antique wooden furniture includes regular dusting with a soft brush. Try to avoid wet cleaning your antique, especially if the wood is unfinished. If you must wet clean, use a mild detergent diluted in distilled water and gently dab the furniture. Pat the cleaned areas dry with distilled water.
Does refinishing antique reduce value?
While emphasizing the value and beauty of an original finish in good condition, they should also advise the public that most furniture does not lose value when refinished, and that, in fact, this furniture should get a new finish when the old one loses its visual and protective qualities.”
Is antique restoration profitable?
Antique restoration businesses can be extremely profitable, especially if the restorer uses their own space in which to work. If working at $75 an hour at an 80% profit margin, you would make $480 for a full workday.
Should you oil antique furniture?
Avoid Oils on Wood Many antique pieces, however, were originally stained rather than painted. Today, some owners make the mistake of oiling stained woods. “Oil is very bad for wood,” Karen says. “It soaks into open grain and oxidizes and can turn the wood black.
Is it better to sand or strip furniture?
It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.
How do you clean old wood without removing finish?
Mix oil and vinegar in a 1:1 ratio in the bowl using a whisk or fork. Dip a small area of the cloth into the mixture and work it into the wood along the wood grain in small circular motions. Wipe away the loosened mildew and residue with a clean dry cloth.
What is the best way to clean old wood furniture?
As a first step to removing layers of grime from old wood furniture, use an oil soap (Murphy Oil Soap Wood Cleaner, $4, Target) and water. Rinse and dry well. If the finish still seems dirty, clean lightly with #0000 steel wool dipped in a cleaning product.
How do you restore faded wood?
Mix thoroughly ¾ cup of oil (canola oil is perfect) and ¼ cup of vinegar (white or apple cider). Follow application instructions, and your wood pieces will be looking as good as new in no time! You can also repair scuffs by rubbing them with a walnut!
Does painting an antique devalue it?
Once paint has been applied to the antique the original patina of the piece is obviously gone, but even if you change your mind months or years later and decide to restore the finish you will never regain the original patina of the antique.
Does refinishing reduce value?
If an item is lacking a good finish, the environment can adversely affect the wood. So, the short answer to this question is NO, refinishing a piece of furniture or doing furniture repair does NOT decrease the piece’s value … but there are a few circumstances that need to be considered.
What’s the difference between antique and vintage?
In the strictest sense, the difference between an antique and a vintage item is its age. Antiques are items which must be at least 100 years old. That means, as of the date of this posting, an antique item was made on or before April of 1918. Vintage items are not as old as antiques.