- 1 How do I restore my antiques?
- 2 Does refinishing antique reduce value?
- 3 How do you restore the finish on antique furniture?
- 4 How do you make old wood look new again?
- 5 Is antique restoration profitable?
- 6 Does painting an antique devalue it?
- 7 Does refinishing reduce value?
- 8 What’s the difference between antique and vintage?
- 9 Should you oil antique furniture?
- 10 Is it better to sand or strip furniture?
- 11 Can you restore weathered wood?
- 12 How do you fix discolored wood?
How do I restore my antiques?
Partner with local antique shops.
- Go into local antique stores and ask if they have anyone who regularly does restoration work for them.
- A partnership may mean that the shop hires you to restore items on an as-needed basis.
- An antique store may be willing to sell pieces that you find and restore on a consignment basis.
Does refinishing antique reduce value?
While emphasizing the value and beauty of an original finish in good condition, they should also advise the public that most furniture does not lose value when refinished, and that, in fact, this furniture should get a new finish when the old one loses its visual and protective qualities.”
How do you restore the finish on antique furniture?
If the reamalgamated finish is very thin, clean the surface with a tack cloth and apply a new coat of the same finish, right over the old one. Let the finish dry, buff it lightly with No. 0000 steel wool, and then wax the piece of furniture with a hard paste wax. Buff the waxed wood with a clean cloth.
How do you make old wood look new again?
- Mix 1 part vinegar to 1 part olive oil.
- Use your lint free cloth to apply the mixture to the wood in direction of the wood grain.
- Let the solution sit on the wood about 10 minutes.
- After 10 minutes take a dry cloth and wipe the excess moisture away.
Is antique restoration profitable?
Antique restoration businesses can be extremely profitable, especially if the restorer uses their own space in which to work. If working at $75 an hour at an 80% profit margin, you would make $480 for a full workday.
Does painting an antique devalue it?
Once paint has been applied to the antique the original patina of the piece is obviously gone, but even if you change your mind months or years later and decide to restore the finish you will never regain the original patina of the antique.
Does refinishing reduce value?
If an item is lacking a good finish, the environment can adversely affect the wood. So, the short answer to this question is NO, refinishing a piece of furniture or doing furniture repair does NOT decrease the piece’s value … but there are a few circumstances that need to be considered.
What’s the difference between antique and vintage?
In the strictest sense, the difference between an antique and a vintage item is its age. Antiques are items which must be at least 100 years old. That means, as of the date of this posting, an antique item was made on or before April of 1918. Vintage items are not as old as antiques.
Should you oil antique furniture?
Avoid Oils on Wood Many antique pieces, however, were originally stained rather than painted. Today, some owners make the mistake of oiling stained woods. “Oil is very bad for wood,” Karen says. “It soaks into open grain and oxidizes and can turn the wood black.
Is it better to sand or strip furniture?
It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.
Can you restore weathered wood?
But, you can bring old wood back to life by using boiled linseed oil and prepare it for a few more decades of service life. Don’t let grey, weathered wood convince you to replace it when all it needs is a little TLC. Other than rot or physical damage, boiled linseed oil is a great treatment for old dried out wood.
How do you fix discolored wood?
Bob Vila recommends applying a small amount of a white nongel toothpaste directly to the discolored area. Rub the toothpaste in the direction of the wood grain using very fine steel wool or a soft cloth. Wipe toothpaste away with a slightly damp cloth, then dry the area with a dry cloth.